Planning New PC

Message

#166 Post by **palmboy5** » Thu Feb 16, 2006 8:51 pm

P180 front door warping is a little more severe now....

#167 Post by **palmboy5** » Fri Feb 17, 2006 1:55 am

LOL LOL LOL antec is teh retarded. my case front door has two magnets on them, one is strangely placed so that when closed the magnet is facing the power button, the other one is placed in a "logical" place with no opposing magnet to do anything with.. then theres a screw sticking out on a plastic sticking-out-thing.
the ONLY magnet thats working is one i cant see inside the case that pulls on that screw. and thats at the very top of the door. the rest pull against nothing. the magnets are strong though..

#168 Post by **palmboy5** » Mon Feb 20, 2006 12:57 pm

lol ok doing true burn-in, undervolted the CPU to 1.325V while keeping the OC, Primes last about 3 hours for now

EDIT:
LOL OH FUCKING SHIZNIT
my 7800GT had a $30 rebate and i forgot to mail it

I7Iz490N · #169 Post by **I7Iz490N** » Mon Feb 20, 2006 8:12 pm

#170 Post by **palmboy5** » Mon Feb 20, 2006 10:28 pm

you asked me about that didnt you

#171 Post by **palmboy5** » Thu Feb 23, 2006 12:13 am

LOL damn it. 277x9 w/ 3-4-4-8, CPU 1.35V RAM 2.95V makes windows crash about 3 minutes in

I7Iz490N · #172 Post by **I7Iz490N** » Thu Feb 23, 2006 9:56 am

2005 · #173 Post by **2005** » Thu Feb 23, 2006 12:27 pm

Up the CPU voltage sligthly and lower the RAM voltages slightly????

#174 Post by **palmboy5** » Thu Feb 23, 2006 3:53 pm

i did up it a notch, like by 0.125V, still crashed....i shouldnt need a higher voltage because the clock speed DID go down by 8MHz. dunno what voltage i should use for the RAM.. it was 2.8V previously... no one ever mentioned that gigaram likes low voltages like i saw for other RAM so dunno

2005 · #175 Post by **2005** » Thu Feb 23, 2006 7:41 pm

I would just go 10x250 and forget about that little ram OC

#176 Post by **palmboy5** » Thu Feb 23, 2006 9:22 pm

no ill run 250x9, this makes RAM run at 237, cuz it follows CPU o.O but its 100% stable now. full load 250x10 Prime will crash eventually due to the heat

ill see to it that i get the 9500LED

I7Iz490N · #177 Post by **I7Iz490N** » Thu Feb 23, 2006 11:01 pm

#178 Post by **palmboy5** » Thu Feb 23, 2006 11:43 pm

im assuming you have a reason for WoW

EDIT:
woops, 250x9.5, not 9

2005 · #179 Post by **2005** » Fri Feb 24, 2006 6:26 pm

250x9.5??? You can have half multi's....

I hope the heat sink on the opty 165 will allow atleast a 2.7ghz OC. Alot of people claim to get that much with no heat issues.

#180 Post by **palmboy5** » Fri Feb 24, 2006 6:43 pm

yeah.. there were always half multipliers... except in the AXP age half multis were known to be detrimental to performance and was not recommended.. dunno about for A64 but performance seems about right for 2375MHz

if you want to know how the heatpiped stock heatsink does just look up how the CPU does with the XP-90